Set The Terminal Number - Siemens HIPATH 8000 Administration Manual
Hide thumbs
Also See for HIPATH 8000:
- Administrator's manual (249 pages) ,
- User manual (217 pages) ,
- Operating manual (193 pages)
Table of Contents
Advertisement
inbetriebnahme.fm
Startup
Quick Start
2.
Click on the tab "Administrator Pages". In the dialog box, enter the admin password:
3.
The administration main page opens. The left column contains the menu tree. If you click
on an item which is printed in normal style, the corresponding dialog opens in the center
of the page. If you click on an item printed in bold letters, a sub-menu opens in the right
column.
2.3.2
Set the Terminal Number
If the user and administrator menus are needed in the course of setup, the terminal number,
which by default is identical with the phone number, must be configured first. The terminal num-
ber input form is presented to the user/administrator right after booting, unless the Plug&Play
facility of the DLS is used. For further information about this setting, please refer to Section
3.5.1.1, "Terminal Identity". With the WBM, the teminal number is configured as follows:
2-8
A31003-O1010-M100-10-76A9, 13/06/2008
HiPath 8000 - OpenStage Family, Administration Manual
Advertisement
Table of Contents
