Advanced Options For Telephone Operation; Terminal Mode - Optipoint Application Module - Siemens HiPath 500 Operating Instructions Manual

Step by Step

Advanced Options for Telephone Operation

Advanced Options for Telephone
Operation
Terminal Mode –
optiPoint application module
The optiPoint application module add-on device
cannot be operated on the
optiPoint 500 economy.
If your optiPoint 500 is equipped with an optiPoint appli-
cation module, the following function is automatically
switched to "Terminal Mode" on startup.
• "Dialing a Number From the Internal Directory"
Page 42.
• "Using a Caller List"
• "Conducting a Conference"
• "Displaying Call Charges (Not for U.S.)"
• "Accepting a Call for Another Member of Your
Team" Page 98.
• "Sending a Message"
• "Leaving an Advisory Message"
"Terminal Mode" means that the prompts are no longer
shown on the optiPoint 500 display, but on the
optiPoint application module display.
The optiPoint application module keypad can also be
used. Alpha texts can be entered easily using this key-
pad Page 118.
Page 38.
Page 54.
Page 70.
Page 80.
Page 82.
117