Connecting The Power Cord - HP 6200 Pro Microtower Series Hardware Reference Manual

Connecting the Power Cord

When connecting the power supply, it is important to follow the steps below to ensure the power cord
does not pull free from the computer.
1. Connect the round end of the power cord to the power supply connector on the rear of the
computer (1).
2. Insert the power cord retainer clip into a slot on the air vent to prevent the cord from becoming
disconnected from the computer (2).
3. Bundle any excess power cord with the supplied strap (3).
4. Plug the female end of the other power cord into the power supply brick (4).
5. Connect the other end of the power cord to an electrical outlet (5).
Figure 5-1
CAUTION:
becoming disconnected and loss of data.
ENWW
Connecting the Power Cord
Failure to secure the power cable with the retainer clip may result in the power cord
Connecting the Power Cord 131