Hardware Installation For Drives; Tools For Installation; Supported Mass Storage Products - HP 748 Owner's Manual

Table 6-1

Hardware Installation for Drives

The following products are supported for mass storage in the Model 748i.
The mass storage module can hold up to four drives. All products include
installation hardware for either a 3.5-in. or 5.25-in. mass storage bay:

Supported Mass Storage Products

4 GB Single-Ended Disk
2 GB Single-Ended Disk
1 GB Single-Ended Disk (with Model 743 processor only)
2 GB Fast Wide Differential Disk (requires optional tray)
4 GB Fast Wide Differential Disk (requires optional tray)
9 GB Fast Wide Differential Disk (requires optional tray)
3.5 in., DDS Tape Drive
5.25 in., CD-ROM Drive
3.5 in., 1.4 MB flexible disk drive

Tools for Installation

Before you start to install a new drive, make sure you have the following
tools:
Medium flat-tipped screwdriver.
#1 Pozidriv driver.
Static-free work area.
Installing and Configuring Mass Storage Devices
Hardware Installation for Drives
Description
6-3