Cabletron Systems Cyber SWITCH 1000 User Manual page 90

EXAMPLE NETWORKS
SAP Send Control:
1) Do Not Send.
2) Send.
Enter a SAP Send Control from the above menu [default = 2]? 1
SAP Receive Control:
1) Do Not Receive.
2) Send.
Enter a SAP Receive Control from the above menu [default = 2]? 2
SAP Respond Control:
1) Do Not Respond.
2) Send.
Enter a SAP Respond Control from the above menu [default = 2]? 2
Finally, you'll see this screen:
Current Configuration for INTERFACE "remotelan":
Interface Type
IPX Network Number
MTU (bytes)
Encapsulation
RIP Configuration:
Send Control
Send Frequency
Receive Control
RIP entry aging time
Respond Control
SAP Configuration:
Send Control
Send Frequency
Receive Control
SAP entry aging time
Respond Control
Are you sure you want to add the INTERFACE "remotelan" (Y or N) ?
When you've completed the configuration of both interfaces, you'll see a summary screen similar
to the following:
IPX INTERFACE Menu:
id Name
1 detroitlan
2 remotelan
(1) Add, (2) Change,
or <RET> for previous menu:
90 CyberSWITCH
WAN (Remote LAN)
0128
1497
Ethernet 802.2
Do Not Send
60 seconds
Receive
180 seconds
Respond
Do Not Send
60 seconds
Receive
180 seconds
Respond
Type
LAN
WAN (Remote LAN)
(3) Delete, (4) Display an INTERFACE
<RET>
Address
0100
0128
<Y>