Save Configuration Files - Cabletron Systems Cyber SWITCH 1000 User Manual

The following screen will be displayed after all four devices in our example have been entered:
Current Device Table (Sorted by Device Name in Ascending ASCII Order)
id DEVICE NAME
-----------------------------
1 "Jill Smith"
2 "Rick Bear"
3 "Todd Jones"
4 "Ralph Moose"
(1) Add, (2) Change, (3) Delete, (4) Display a Device or press <RET> for previous
menu?
Return to the Security Configuration Menu.
C U
ONFIGURING THE SER
This network doesn't require the use of a user level database. Therefore, no changes are necessary.
C O -
ONFIGURING THE FF NODE
The default configuration for Off-node Server Information is None (Use On-node). Since this
network doesn't require the use of an off-node server, no changes are necessary.
C N
ONFIGURING THE ETWORK
This network doesn't require the use of a user level database so network login information
configuration is not necessary.
S C
AVE ONFIGURATION
We have now configured all the required information for this example. Press 4 from the Main menu
to save the changes. The old configuration files will be stored in the \CONFIG directory with a file
extension of .BAK (e.g., the old NODE.NEI file will be called NODE.BAK).
After you save the configuration files, press <RET> to exit the CFGEDIT program. Reboot the
system to activate your changes.
L D
EVEL ATABASES
S I
ERVER NFORMATION
L I
OGIN NFORMATION
F
ILES
IP R
Configure the CyberSWITCH
Workgroup Remote Access Switch
N
OUTING ETWORK
43