Canon CLC 1120 Service Handbook page 48

CHAPTER 2 STANDARDS AND ADJUSTMENTS
Orientation of the Deck Pickup
5
Roller
When mounting the deck pickup roller [1]
at the front, be sure that the marking [2] on the
collar (silver-colored) is at the copier's front
and the marking [3] on the side of the roller is
at the copier's rear.
When mounting the deck pickup roller
[4], be sure that the marking [5] on its inside
and the marking [6] on its collar (gold-
colored) are at the copier's rear.
Orientation of the Deck Pickup/
6
Feed Roller
When mounting the deck pickup/feed
roller [1], be sure that the belt pulley [2] is at
the copier's front.
When mounting the pickup/feed roller
rubber to the pickup/feed roller shaft, be sure
that the marking [3] is at the copier's rear.
2-30
Figure 2-60
Figure 2-61
[3]
[2]
[1]
Figure 2-62
(front)