Canon CLC 1120 Service Handbook page 164

Color laser copier
Hide thumbs Also See for CLC 1120:
Table of Contents

Advertisement

CHAPTER 4 SERVICE MODE
CCD
Adjusts the CCD
Level 3
EC-B
For future expansion.
EC-G
EC-R
LASER
Adjusts the laser system.
Level 3
T-V00
Use it to enter the laser control initial value at V00
for text mode (800 lines) as upon replacement of the
laser unit.
T-VFF
Use it to enter the laser control initial value at VFF
for text mode (800 lines) as upon replacement of the
laser unit.
P3-V00
Use it to enter the laser control initial value at V00
for photo mode (400 lines) as upon replacement of
the laser unit.
P3-VFF-1
Use it to enter the laser control initial value at VFF
(45%) for photo mode (400 lines) as upon
replacement of the laser unit.
P3-VFF-2
Use it to enter the laser control initial value at VFF
(55%) for photo mode (400 lines) as upon
replacement of the laser unit.
P3-VFF-3
Use it to enter the laser control initial value at VFF
(65%) for photo mode (400 lines) as upon
replacement of the laser unit.
P3-VFF-4
Use it to enter the laser control initial value at VFF
(70%) for photo mode (400 lines) as upon
replacement of the laser unit.
POWER
Use it to turn on the laser output when adjusting the
laser power.
T-V00-ON
Use it to turn on the laser output when checking T-
V00.
T-VFF-ON
Use it to turn on the laser output when checking T-
VFF.
P3V00-ON
Use it to turn on the laser output when checking P3-
V00.
P3-V1-ON
Use it to turn on the laser output when checking P3-
VFF-1.
P3-V2-ON
Use it to turn on the laser output when checking P3-
VFF-2.
P3-V3-ON
Use it to turn on the laser output when checking P3-
VFF-3.
P3-V4-ON
Use it to turn on the laser output when checking P3-
VFF-4.
Note 1: Execute this mode upon replacement of a CPU PCB or initialization of the RAM. The settings
will be returned to standard settings, requiring you to enter the appropriate settings. Be sure to
record any new settings on the service label.
4-78
Description
Description
COPIER>ADJUST
Remarks
Remarks
0 to 255
Press the OK key to start and
the Stop key to stop.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Clc 1130Clc 1150

Table of Contents