Canon CLC 1120 Service Handbook page 159

Level 1 Level 2
ADJUST
Level 1 Level 2
ADJUST
FEEDER>ADJUST Items
Level 3 Settings
ADJ-RX 0 to 255
ADJ-RY 0 to 255
ADJ-DX 0 to 255
ADJ-DY 0 to 255
PRJ>ADJUST Items
Level 3 Settings
DS-PRJ 0 to 31
DS-OHP 0 to 31
RD-XS -300 to +300
RD-XE -300 to +300
RD-YS -300 to +300
RD-YE -300 to +300
DA-XS -99 to +99
DA-XE -99 to +99
DA-YS -99 to +99
DA-YE -99 to +99
CHAPTER 4 SERVICE MODE
Description
adjustment of registration in sub scanning
direction with the multifeeder in use (in units
of 0.1 mm)
adjustment of registration in main scanning
direction with the multifeeder in use (in units
of 0.1 mm)
adjustment of registration in sub scanning
direction with the multifeeder in use in
manual feed mode (in units of 0.1 mm)
adjustment of registration in main scanning
direction with the multifeeder in use in
manual feed mode (in units of 0.1 mm)
Description
adjustment of the slice level for the
projection area with the projector in use
adjustment of the slice level for original
detection from the reference sheet position
of film with the projector in use
adjustment of the read area with original
detection OFF and with the projector in use
(in units of 0.06 mm; standard: 0)
adjustment of the read area with original
detection OFF and with the projector in use
(in units of 0.06 mm; standard: 0)
adjustment of the read area with original
detection OFF and with the projector in use
(in units of 0.06 mm; standard: 0)
adjustment of the read area with original
detection OFF and with the projector in use
(in units of 0.06 mm; standard: 0)
adjustment of the read area with original
detection ON and with the projector in use
(in units of 0.11 mm; standard: 0)
adjustment of the read area with original
detection ON and with the projector in use
(in units of 0.11 mm; standard: 0)
adjustment of the read area with original
detection ON and with the projector in use
(in units of 0.06 mm; standard: 0)
adjustment of the read area with original
detection ON and with the projector in use
(in units of 0.06 mm; standard: 0)
4-73