Canon CLC 1120 Service Handbook page 21

For the Multifeeder
Turn the screw [1] to move the position of
the tray so that the registration is 2.0 ± 1.5
mm in Direct.
For the Duplexing Unit
Loosen the screw [1], and move the
position of the paper jogging guide so that
the registration is 2.0 ± 1.5 mm in Direct.
b. Adjusting the Attraction Position
(ATTRACT)
1) Select A4.
2) Select ADJUST>FEED-ADJ>ATT-
CHK.
3) Set ATT-CHK to '1' (2-sheet retention;
sides B and A), and press OK.
4) Select ATT-ON, and press OK.
• Copy paper will be picked up,
attracted, and stopped.
CHAPTER 2 STANDARDS AND ADJUSTMENTS
[1]
Figure 2-5
[1]
Figure 2-6
2-3