Canon CLC 1120 Service Handbook page 37

b. Attaching the Transfer Drum Sheet
Caution:
Do not touch the area on the transfer
drum sheet where copy paper will be
attracted.
1) Shift the locking lever of the transfer
blade and the attraction brush in
clockwise direction to release them.
2) Clean the area where double-sided tape is
attached on the transfer drum ring with
alcohol.
3) Turn the ring so that the ring linking plate
[1] is positioned as shown.
4) Remove the double-sided tape from the
leading edge (where holes are found) of
the transfer drum sheet.
5) By referring to the long hole in the left
side of the linking plate and the long hole
on the left side of the sheet, attach the
transfer drum sheet so that it is horizontal
while observing the following:
CHAPTER 2 STANDARDS AND ADJUSTMENTS
Figure 2-39
[1]
Figure 2-40
Figure 2-41
2-19