Canon CLC 1120 Service Handbook page 150

CHAPTER 4 SERVICE MODE
Cont'd
4-64
IEL-L1 -8 to 0
IEL-L2 -8 to 0
IEL-N1 -8 to 0
IEL-N2 -8 to 0
IEL-T1 -8 to 0
IEL-T2 -8 to 0
IEL-UT1 -8 to 0
IEL-UT2 -8 to 0
IEL-S1-1 -8 to 0
IEL-S2-1 -8 to 0
IEL-OHP -8 to 0
IEL-POST -8 to 0
Environment C (C-ZONE)
for thin paper, internal static eliminator bias
adjustment for single-sided copying or
copying on the 1st side of a double-sided
copy (in units of 0.5 kV)
for thin paper, internal static eliminator bias
adjustment for copying on the 2nd side of a
double-sided copy (in units of 0.5 kV)
for plain paper, internal static eliminator
bias adjustment for single-sided copying or
copying on the 1st side of a double-sided
copy (in units of 0.5 kV)
for plain paper, internal static eliminator
bias adjustment for copying on the 2nd side
of a double-sided copy (in units of 0.5 kV)
for thick paper, internal static eliminator
bias adjustment for single-sided copying or
copying on the 1st side of a double-sided
copy (in units of 0.5 kV)
for thick paper, internal static eliminator
bias adjustment for copying on the 2nd side
of a double-sided copy (in units of 0.5 kV)
for extra thick paper, internal static
eliminator bias adjustment for single-sided
copying or copying on the 1st side of a
double-sided copy (in units of 0.5 kV)
for extra thick paper, internal static
eliminator bias adjustment for copying on
the 2nd side of a double-sided copy (in units
of 0.5 kV)
for special paper 1, internal static eliminator
bias adjustment for single-sided copying or
copying on the 1st side of a double-sided
copy (in units of 0.5 kV)
for special paper 2, internal static eliminator
bias adjustment for single-sided copying or
copying on the 1st side of a double-sided
copy (in units of 0.5 kV)
for transparencies, internal static eliminator
bias adjustment (in units of 0.5 kV)
for postcards, internal static eliminator bias
adjustment (in units of 0.5 kV)