Canon CLC 1120 Service Handbook page 193

CST
Executes cassette/multifeeder size auto adjustment.
Level 3
C2-STMTR Use it to store the paper width detection reference
C2-A4R point for cassette 2/3 (for CLC1150, cassette 3).
C3-STMTR Using ht Item
C3-A4R 1) Adjust the side guide pal of the bottommost
cassette to STMTR.
2) Select C2-STMTR or C3-STMTR (to highlight),
and press the OK key.
3) Likewise, store a reference point for A4R size.
MF-A4R Use it to store the paper width detecting reference
MF-A6R point for the multifeeder.
MF-A4 Using the Item
1) Place A4R paper in the multifeeder, and adjust the
side guide to A4R.
2) Select MF-A4R (to highlight), and press the OK
key.
3) Likewise, store the reference point for A6R and
A4.
CLEANING
Checks cleaning operation.
Level 3
KCLN Use it to rotate the transfer drum while keeping the
polishing roller in contact.
Using the Item
1) Select the item (to highlight), and press the OK
key.
2) The operation will stop automatically in about 5
min.
Description
Description
CHAPTER 4 SERVICE MODE
COPIER>FUNCTION
Remarks
STMTR width: 139.5 mm
A4R width: 210 mm
For fine adjustment after
storing a reference point, use
paper width basic value
adjustment in ADJUST>CST-
ADJ.
A4R width: 210 mm
A6R width: 105 mm
A4 width: 297 mm
For fine adjustment after
storing a reference point, use
paper width basic value
adjustment in ADJUST>CST-
ADJ.
Remarks
You cannot stop this mode
before the ongoing job ends.
4-107