CHAPTER 4 SERVICE MODE
G. PG (test print)
Level 1
Level 2
TEST
PG
4-134
COPIER>TEST Items
Level 3
Description
TYPE
use it to enter the type number of a test print, and
press the Copy Start key to start printing (00:
normal copying)
TXPH
use it to switch the number of lines for test printing
(0: 200 lines, 1: 400 lines, 2: 800 lines)
THRU
use it to switch LUT for test printing (0: LUT
present, 1: LUT absent)
DENS-Y
use it to adjust the Y density for TYPE=05 during
test printing (0 to 255; a higher setting darkens the
image)
DENS-M
use it to adjust the M density for TYPE=05 during
test printing (0 to 255; a higher setting darkens the
image)
DENS-C
use it to adjust the C density for TYPE=05 during
test printing (0 to 255; a higher setting darkens the
image)
DENS-K
use it to adjust the Bk density for TYPE=05 during
test printing (0 to 255; a higher setting darkens the
image)
COLOR-Y
use it to set the Y output for each TYPE (0: no
output, 1: output)
COLOR-M
use it to set the M output for each TYPE (0: no
output, 1: output)
COLOR-C
use it to set the C output for each TYPE (0: no
output, 1: output)
COLOR-K
use it to set the Bk output for each TYPE (0: no
output, 1: output)