Canon CLC 1120 Service Handbook page 161

Level 1 Level 2
ADJUST
N-DA-XE -99 to +99
N-DA-YS -99 to +99
N-DA-YE -99 to +99
O-DA-XS -99 to +99
O-DA-XE -99 to +99
O-DA-YS -99 to +99
O-DA-YE -99 to +99
CHNGR-X -99 to +99
CHNGR-Y -99 to +99
EDITOR>ADJUST Items
Level 3 Settings
ED-X -99 to +99
ED-Y -99 to +99
LOOP-MB 0 to 3
LOOP-TH 0 to 255
MRK-MB 0 to 3
MRK-TH 0 to 255
CHAPTER 4 SERVICE MODE
adjustment of frame erasing width for
negative film with the projector in use (in
units of 0.6 mm; standard: 50)
adjustment of frame erasing width for
negative film with the projector in use (in
units of 0.6 mm; standard: 50)
adjustment of frame erasing width for
negative film with the projector in use (in
units of 0.6 mm; standard: 50)
adjustment of frame erasing width for
transparencies with the projector in use (in
units of 0.6 mm; standard: 24)
adjustment of frame erasing width for
transparencies with the projector in use (in
units of 0.6 mm; standard: 8)
adjustment of frame erasing width for
transparencies with the projector in use (in
units of 0.6 mm; standard: 32)
adjustment of frame erasing width for
transparencies with the projector in use (in
units of 0.6 mm; standard: 24)
adjustment of position in main scanning
direction with the rotary changer of the
projector in use (in units of 0.6 mm;
standard: 0)
adjustment of position in sub scanning
direction with the rotary changer of the
projector in use (in units of 0.6 mm;
standard: 0)
Description
adjustment of input coordinates in editor sub
scanning (X) direction (in units of about 0.13
mm; standard: 0)
adjustment of input coordinates in editor
main scanning (Y) direction (in units of
about 0.13 mm; standard: 0)
adjustment of processing used when reading
images into memory for coloring in area
select/color create mode (standard: 0; a
higher setting makes filling of gaps easier)
adjustment of the binary slice level used
when reading images into memory for
coloring in area select/color create mode
(standard: 192; a higher setting enables
reading of fine lines)
adjustment of processing used when reading
images into memory for marking/pointing
(standard: 0; a higher setting makes filling of
gaps easier)
adjustment of the binary slice level used
when reading images into memory for
marking/pointing (standard: 128; a higher
setting enables reading of fine lines)
4-75