Canon CLC 1120 Service Handbook page 129

Address bit
P019 15 No. 3/No. 4 DC remote signal
14 No. 3/No. 4 WBP remote signal
13 No. 1/No. 2 DC remote signal
12 No. 1/No. 2 WBP remote signal
11 DC output select 4 signal
10 DC output select 3 signal
9 DC output select 2 signal
8 DC output select 1 signal
7 transfer acceleration remote signal
6 trainer 0 µ remote signal
5 transfer DC remote signal
4 attraction acceleration remote signal
3 attraction 0 µ remote signal
2 attraction DC remote signal
1 grid remote signal
0 primary DC remote signal
P01A 15 HV-DEV-ENABLE signal
14 HV-DC-ENABLE signal
13 HV-AC-ENABLE signal
12 post-cleaning charging
11 separation DC remote signal
10 separation AC remote signal
9 internal static eliminator DC remote signal
8 internal static eliminator AC remote signal
7 not used
6 multifeeder lifter motor (M15) reverse drive signal
5 multifeeder lifter motor (M15) normal rotation
drive signal
4 deck lifter motor (M101) drive signal
3 deck lifter down signal
2 cassette 1 lifter motor (M11) drive signal
1 cassette 2 lifter motor (M12/DM12) drive signal
0 cassette 3 lifter motor (M13/DM13) drive signal
Description
DC remote signal
CHAPTER 4 SERVICE MODE
I/O>DC-CON
Remarks
0: remote
0: remote
0: remote
0: remote
0: select
0: select
0: select
0: select
1: accelerate, 0: 0 µ
0: accelerate, 1: 0 µ
0: remote
1: accelerate, 0: 0 µ
0: accelerate, 1: 0 µ
0: remote
0: remote
0: remote
0: ENABLE
0: ENABLE
0: ENABLE
0: remote
0: remote
0: remote
0: remote
0: remote
1: down
1: up
0: ON
1: down
1: ON
1: ON
1: ON
4-43