Canon CLC 1120 Service Handbook page 197

Level 3
MTR-ON Use it to check the operation of the motor selected
using MTR.
Using the Item
1) Select the item (to highlight), and press the OK
key.
• The motor will turn on.
2) In about 20 sec, the operation will stop
automatically.
SL Use it to select the solenoid to check.
Using the Item
1) Select the item (to highlight).
2) Enter the code of the solenoid using the keypad.
3) Press the OK key.
SL-ON Use it to check the operation of the solenoid selected
using SL.
Using the Item
1) Select the item (to highlight), and press the OK
key.
• The solenoid will turn on.
2) To stop, press the Stop key.
SHV Use it to select the high-voltage output to check.
Using the Item
1) Select the item (to highlight).
2) Enter the code of the high-voltage output using the
keypad.
3) Press the OK key.
SHV-ON Use it to check the operation of the high-voltage
output selected using SHV.
Using the Item
1) Select the item (to highlight), and press the OK
key.
• The high-voltage output will turn on.
2) The operation will stop automatically after
generating a specific high-voltage output.
Codes and Clutches
Code
0 duplexing feed clutch (CL14)
1 ---
2 registration clutch (CL9)
3 multifeeder feed clutch (CL10)
4 multifeeder pickup clutch (CL16)
5 deck pickup clutch (CL102)
6 re-pickup clutch (CL15)
Description
Name
Table 4-5
CHAPTER 4 SERVICE MODE
See Table 4-8.
Codes 10 through 20 are not
used.
See Table 4-9.
Codes 6 through 20 are not
used.
Code
7 cassette 1 pickup clutch (CL11)
8 cassette 2 pickup clutch (CL12/DCL12)
9 cassette 3 pickup clutch (CL13/DCL13)
10 not used
11 postcard feed clutch (CL18)
12 buffer path clutch (CL1)
- -
COPIER>FUNCTION
Remarks
Name
4-111