Job Flow Sheets; Using The Job Flow Sheets Service - Xerox WorkCentre 5225 User Manual

7 Job Flow Sheets

This chapter describes the Job Flow Sheets service and the features available on the
[Job Flow Sheets] screen.
A job flow sheet can execute a series of programmed operations. To process scanned
documents using a job flow sheet created on a networked computer, using a utility such
as Job Flow Sheet Editor, use the [Job Flow Sheets] service on the All Services screen.
NOTE: Some models require the Network Scanning Kit to enable the Job Flow Sheets
service.
NOTE: To communicate with a networked computer, enable the SOAP port on the
machine. For instructions on how to enable the SOAP port, refer to the Setups chapter
in the System Administration Guide.

Using the Job Flow Sheets Service

This section describes how to process a scanned document using a job flow sheet
created on a networked computer.
1.
Press the <All Services> button
on the machine.
2.
Select [Job Flow Sheets] on the
All Services screen.
3.
Select a job flow sheet from the
list on the [Job Flow Sheets]
screen.
NOTE: Only the job flow sheets you
are permitted to execute are
displayed on the screen.
NOTE: The job flow sheets can be sorted by their names or the dates they were last
updated by selecting [Name] or [Updated]. Selecting [Name] or [Updated] again
toggles the list between ascending and descending order.
<All Services> button
155