Layout Adjustment - Fax/Internet Fax/Server Fax; Original Size - Xerox WorkCentre 5225 User Manual

Layout Adjustment - Fax/Internet Fax/Server Fax

This section describes the layout adjustment features for a fax/Internet Fax job. For
information on the features available, refer to the following:
Original Size – page 97
Book Faxing – page 98
Reduce/Enlarge – page 98
1.
Make sure that the desired fax service is enabled.
2.
Press the <All Services> button
on the control panel.
3.
Select [Fax] or [Internet Fax] on
the touch screen.
4.
Select the [Layout Adjustment]
tab.
5.
Select the required feature.

Original Size

This feature allows you to set the size of a document automatically, to select from a list
of preset sizes, or to mix different sized documents. If you select a preset size,
documents will be scanned according to that size regardless of their actual size.
1.
Select [Original Size] on the
[Layout Adjustment] screen.
2.
Select the required option.
3.
Select [Save].
Auto Detect
Detects the size of documents automatically.
Manual Size Input
Allows you to select from 11 preset standard sizes in Portrait and Landscape
orientations. The presets are set up by the System Administrator.
NOTE: Custom sizes cannot be set as presets.
Mixed Sized Originals
Allows you to scan more than one original size document into a single output set. The
machine senses mixed sized originals automatically, and sends each document at the
same size as the original. Load different size documents, with top left corners aligned,
into the document feeder.
NOTE: 5.5 × 8.5" and A5 originals must be loaded in portrait orientation.
Layout Adjustment - Fax/Internet Fax/Server Fax
97