Warning Markings; Electrical Supply; Operator Accessible Areas - Xerox WorkCentre 5225 User Manual

Hide thumbs Also See for WorkCentre 5225:
Table of Contents

Advertisement

WARNING: Unauthorized alterations, which may include the addition of new
functions or connection of external devices, may impact the product
certification. Please contact your Xerox representative for more information.
This product and recommended supplies have been tested and found to comply with
strict safety requirements including safety agency approvals and compliance with
environmental standards. Follow the following instructions for safety use.
WARNING: Any unauthorized alteration including an addition of new functions or
connection to external devices may not be covered by the product warranty. Contact
your local Xerox representative for more information.

Warning Markings

All warnings and instructions marked on or supplied with the product should be
followed.

Electrical Supply

This product shall be operated by the power source as indicated on the product's data
plate. Consult your local power company to check if your power source meets the
requirements.
risk of electric shock. Never use an earthed adapter plug to connect the product to the
electrical outlet that has no earth connection terminal.
Improper connection of a grounding conductor may cause electric shock.

Operator Accessible Areas

This product is designed to prohibit operator access to hazardous areas. The hazard
areas are isolated from operators by covers or protectors which require a tool to
remove. To prevent electric shock and injuries, never remove those covers and
protectors.
WARNING This symbol alerts users to areas of the equipment where there is
the possibility of personal injury.
WARNING This symbol alerts users to areas of the equipment where there are
heated or hot surfaces, which should not be touched.
CAUTION
This symbol alerts users to areas of the equipment which require
special attention to avoid the possibility of personal injury or
damage to the equipment.
WARNING This symbol indicates a Laser is being used in the equipment and
alerts the user to refer to the appropriate safety information.
WARNING: Connect this product to a protective earth circuit.
This product is supplied with a plug that has a protective earth pin. The plug
fits only into an earthed electrical outlet. This is a safety feature. If the plug
doesn't fit to the outlet, contact an electrician to replace the outlet to avoid
Safety Notes
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workcentre 5230Workcentre 5222

Table of Contents