Modes; All Services; Features - Xerox WorkCentre 5225 User Manual

<Energy Saver> light is on. The Sleep Mode is cancelled when the <Energy Saver>
button is pressed, or a fax or print job is received by the machine. The factory default
setting of 5 minutes is customer changeable within the range of 2 to 60 minutes, and
must be longer than the Low Power Mode time value. The time specified for entering
the Sleep Mode will be counted from when the machine enters the Low Power Mode.
NOTE: For information on how to change the default time settings, refer to the Setups
chapter in the System Administration Guide.

Modes

Use the following buttons to access the screens which allow you to select features,
monitor the status of jobs, and obtain general information on the machine:

• All Services

• Features

• Job Status
• Machine Status
NOTE: These buttons do not respond when the machine is in the System
Administration mode.
All Services
Use this button to access all the services available on the machine.
NOTE: The arrangement of service icons displayed on the screen can be changed by
the System Administrator.
1.
Press the <All Services> button
on the control panel.
Features
Use this button to return the display to the previous service screen when the Job Status
screen or Machine Status screen is displayed. The previous service screen may not
appear, even if you press this button, if you are in one of the service screens. In this
case, use the <All Services> button to select the required service.
<Machine Status> button
Modes
<All Services>
button
<Features>
button
<Job Status>
button
41