Changing Default Mobile Phone; Resetting; Disconnecting The Seraph From The Software - Benefon SERAPH NT Operating Instructions Manual

PART B: CONFIGURING SETTINGS FOR THE SERAPH

Changing default mobile phone

When any Benefon phone or device is connected to the Be-
newin, the software identifies it automatically, and offers
you the correct data fields for editing.
To make off-line configuration for some other Benefon
phone (e.g. Esc!) when the phone is unavailable, you need
to change the default mobile phone in Benewin.
1. Change the default Benefon mobile phone by selecting
Benewin Pro... from the
desired phone model from the pop-up menu, located
on the toolbar.
2. As the correct phone is selected, the data fields of this
phone model are available and can be opened from the
My computer node, by double-clicking the desired sub-
node.

Resetting

You can reset major part of the settings made in Benewin by
selecting Reset Seraph settings
By using this option, most of the emergency and telematics
settings, such as Emergency numbers
will be reset at once.
To view the reset settings in detail, you need to save them
to the device and load them from the device once again.
12 THE BENEWIN SOFTWARE FOR THE SERAPH
Edit menu, or highlighting the
from the Mobile menu .
, Authorised numbers
Disconnecting the Seraph
from the software
1. Choose Disconnect
Or, click the button
2. To unplug the device from the cable, press and hold
down the release button (3) on the top of the small end
of the cable.
Gently pull the cable from the system connector of the
device.
,
from the Mobile menu.
Disconnect on the toolbar.
3