Table of Contents
Advertisement
ENDING EMERGENCY MODE MANUALLY
Depending on configuration, the emergency cycle can be
ended either automatically or manually.
Manual ending of the emergency cycle means, the emergen-
cy numbers are permitted to track the device without fur-
ther notice after the emergency cycle is put through. The
emergency settings are kept on until the emergency mode is
ended. This additional feature is for increasing user´s safety
in an emergency situation.
While the device is being tracked, it will discreetly send po-
sition messages to the tracking number informing of its cur-
rent location. The tracking number can be e.g. an
emergency number or service center number.
•To end the emergency mode, press the
NOTE: In case an emergency number is also stored in autho-
rized numbers list, the emergency number is authorized
permanently. In practise, it means that this number can go
on tracking the device even after the emergency mode is
ended.
For more information on configuring the way to end the
emergency mode, see
SETTING MANUAL EMERGENCY MODE TER-
.
MINATION ON PAGE 23
PART C: OPERATING THE SERAPH
c
key briefly.
Making network emergency call
Making calls and sending messages to normal phone num-
bers or the emergency numbers is NOT possible in these
cases:
- The device has no SIM card inserted or
- The PIN code has been rejected or
- The list of emergency numbers
list) is blank or
- The network being used only allows calls to the net-
work emergency number (e.g. 112, 911).
If the BeneGuard button is pressed under the circumstanc-
es, the device will display SOS query:
•To make the network emergency call, press
c
•To cancel the call, press
OUTGOING CALLS AND MESSAGES 41
(Reporting and calling
l
.
or do nothing.
Advertisement
Table of Contents
