Table of Contents
Advertisement
PART B: CONFIGURING SETTINGS FOR THE SERAPH
SETTING MANUAL EMERGENCY MODE
TERMINATION
By leaving the check box blank, the emergency mode ends
and the device returns to normal mode automatically, after
going through the emergency cycle.
By checking the box, emergency mode is on until it is turned
off manually (14). While the emergency mode is on, emer-
gency numbers are allowed to track the device without fur-
ther notice right after the emergency cycle is put through.
Ongoing emergency mode means also that the emergency
display and tone settings are on until the emergency mode
is ended. E.g. if the device is set to be silent during emer-
gency mode, it will stay silent, even if the device receives in-
coming call.
When the tracking is not needed any more, the emergency
c
mode can be ended by pressing the
key.
NOTE: To allow emergency numbers track the device tem-
porarily, check the
Manual emergency mode termination
box,
and check the
Authorization On
box. For more information
on authorization, see
.
AUTHORIZATION ON PAGE 25
For more information on using and ending emergency
mode manually, see
ENDING EMERGENCY MODE MANUALLY ON
.
PAGE 41
SERAPH SETTINGS: EMERGENCY 23
Advertisement
Table of Contents
