Seraph Settings: Calls; Calling; Storing Number For Making Calls; Storing Number For Sending Position Reports - Benefon SERAPH NT Operating Instructions Manual

Hide thumbs Also See for SERAPH NT:

Table of Contents

PART B: CONFIGURING SETTINGS FOR THE SERAPH

SERAPH SETTINGS: CALLS

Key in the phone number for making information calls (1).

The name associating the number is displayed, if it is stored

in the phone book and read from there (1a). For more infor-

mation on storing the phone book information, see

EDITING

AND ADDING AN ENTRY ON PAGE 14

If the number field is left blank, information calls cannot be

made.

STORING NUMBER FOR SENDING POSITION

REPORTS

Key in the SMS number for sending position reports (2). The

name associating the number is displayed, if it is stored in

the phone book and read from there.

If the number field is left blank, position reports cannot be

sent.

NOTE: After sending position report, the receiving party

might call back to the device. The call will be put through if

the caller is an allowed caller. It is possible to attach auto-

matic answer to the incoming call, as well. For more infor-

mation, see

ALLOWED CALLERS ON PAGE 17

For more information on making information calls and

sending position reports, see

MAKING INFORMATION CALLS ON

PAGE 38

16 SERAPH SETTINGS: CALLS

Table of Contents