Table of Contents
Advertisement
Turning the device off
1. To power off the device, press the upmost side key
and hold it down for a few seconds. Note that some con-
figurations do not allow the device to be turned off nor-
mally.
2. The logo will be shown and the
3. The device may also notify the service center of the pow-
er off. For more information, see
POWER ON AND OFF ON PAGE 27
Adjusting volume
To adjust speaker volume during a call, press the lower side
keys briefly.
z
•The
key increases the volume
y
•The
key decreases the volume.
Silencing alert tone
When the device alerts of an incoming call, the alert tone
can be silenced by pressing the lower side key
About tone notifications
Tones are played through the loudspeaker simultaneously
when corresponding notifications are displayed. There are
several different tones informing of various situations.
32 USER INTERFACE
PART C: OPERATING THE SERAPH
/
Power off
tone heard.
SETTINGS FOR MANUAL
.
y
briefly.
Display indicators
D
-
EVICE IN STAND
BY MODE
B
ATTERY INDICATOR
G
PS POSITIONING
INDICATORS
N
/
ETWORK OPERATOR
SERVICE PROVIDER
IDENTIFIER
G
PS POSITIONING STATUS
GPS is active
GPS is sleeping
GPS is turned off /GPS has encountered an error
Bars on the left indicate accuracy of the latest
position fix; The more bars and the taller the bars,
the better the position.
- Four bars - the most accurate position
- No bars - no position.
G
SM NETWORK
INDICATORS
Advertisement
Table of Contents
