Allowed Callers; Allowing All Incoming Calls; Allowing Part Of The Incoming Calls; Blocking All Incoming Calls - Benefon SERAPH NT Operating Instructions Manual

PART B: CONFIGURING SETTINGS FOR THE SERAPH

Allowed callers

You can restrict callers if you like. You have three alternative
settings to choose from: All
1
2
2b
3

ALLOWING ALL INCOMING CALLS

The All option has no blockage at all, all incoming calls are
welcome and put through. To select it, check the box (1).
, Only listed , and None .
1a
2a
2c
By checking the Answer automatically
calls will also be answered automatically. The device con-
tains a built-in microphone and speaker and after certain
number of rings, the device will answer an incoming call au-
tomatically by opening audio to the allowed caller.

ALLOWING PART OF THE INCOMING CALLS

You can specify allowed callers (2), i.e. the ones, who are
permitted to call to the device at any time:
are always put through - calls from other numbers are
blocked.
Key in the phone numbers (2a). The names associating the
numbers are displayed, if they are stored in the phone book
and read from there (2b). You can also attach automatic an-
swer function to the desired numbers by checking the cor-
responding boxes (2c).
NOTE: The listed numbers must have the CLIP (Call Line
Identification Presentation) feature enabled and roaming
should also support it. If the CLIP support is not ensured,
select the previous option

BLOCKING ALL INCOMING CALLS

The None option blocks all incoming calls with no exception
whatsoever (3).
SERAPH SETTINGS: CALLS 17
box (1a), all incoming
Only listed callers
Allow all incoming calls .