Table of Contents
Advertisement
PART B: CONFIGURING SETTINGS FOR THE SERAPH
SELECTING PROCESSING ORDER
You can define order for making emergency (voice) calls
and sending emergency reports while the emergency cycle
is on. Click the arrow and highlight the desired option (5).
You have two choices:
•
Reports and calls in pairs
: The device will make a voice call
and send an SMS in pairs according to the list order, start-
ing from the top.
•
: When the emergency cycle is initi-
All reports before calls
ated, first the device will send the emergency reports,
after which the voice calls will be made starting from the
top of the list of the emergency numbers.
SETTING TIMEOUT FOR CALL ATTEMPTS
You can define for how long a time the device tries to call a
single emergency number before moving on to the next
number in the list of emergency numbers.
Click the arrow and highlight the desired option (6).
SELECTING CALL MODE
To select the call mode, click the arrow (7) and highlight the
desired option:
Audio both ways
ber
.
If there is a need to ask directions or have a conversation,
the call mode should be set to
If there is a need to quietly listen in the surroundings of the
device, the call mode should be set to
numbers
. By using this option, the emergency number be-
comes a silent listener: Not a sound is heard from the emer-
gency number.
SETTING HANDS FREE IN EMERGENCY MODE
By checking the box (8), hands free operation can be used
in emergency calls. This way the device operates as a speak-
er phone.
SERAPH SETTINGS: EMERGENCY 21
or
Audio to emergency num-
Audio both ways
.
Audio to emergency
Advertisement
Table of Contents
