Setting Confirmation For Emergency Report Delivery; Setting Display Notifications; Setting Call Number Mask; Setting Emergency Tones - Benefon SERAPH NT Operating Instructions Manual

PART B: CONFIGURING SETTINGS FOR THE SERAPH
SETTING CONFIRMATION FOR EMERGENCY
REPORT DELIVERY
By checking the Resend unconfirmed reports
request a confirmation just to make sure that someone has
received an emergency report. The device will resend the
emergency reports until it receives a confirmation of the
successful delivery.
By selecting a value in Resend timeout
specify the waiting time, i.e. for how long a time the device
waits for the confirmation before trying to reach some other
emergency report number (9a).
NOTE: This feature is not supported in all control systems.
Using this feature in a system which does not support it can
lead to massive resending of messages and high charges.

SETTING DISPLAY NOTIFICATIONS

To make the device to display emergency cycle notifications,
check the
Display notifications
see clearly how the emergency cycle is proceeding.
If you want the device to make discreet emergency cycle
with no lights, or display notifications on, leave the check
box blank. Moreover, to make it also silent, leave the
tones check box blank (see below).
22 SERAPH SETTINGS: EMERGENCY
box (9), you can
data field, you can
box (10). This way you can
Play

SETTING CALL NUMBER MASK

You can name the emergency cycle as you like (11). This is
the way to mask the real phone number to which you are
calling.
The "nickname" will be displayed during an emergency
cycle.

SETTING EMERGENCY TONES

To make the device to play tones during an emergency cycle,
check the Play tones box. This way you can hear how the
emergency cycle is proceeding.
If you want the device to make silent emergency call, leave
the Play tones check box blank (12). To make it also show
no lights or emergency displays, leave the
tions box blank (see above).

SETTING VIBRATION

By checking the box, the device will vibrate during an emer-
gency cycle. Vibration can be used concurrently with emer-
gency cycle tones, or instead of them.
Vibration is not in use if the check box is left blank (13).
Display notifica-