Remote Configuration Message; Location Request Messages; At Commands - Benefon SERAPH NT Operating Instructions Manual

Hide thumbs Also See for SERAPH NT:

Table of Contents

REMOTE CONFIGURATION MESSAGE

The device may receive a specific MPTP message for the re-

mote configuration. Remote configuration messages con-

tain settings for e.g. emergency numbers, authorized

numbers, tracking, area tracking, and GPS operating mode.

For more information on remote configuration, please see

the separate document on MPTP commands, located at the

Web site: www.benefon.com.

The device may receive several different messages request-

ing location. Such messages could be, e.g. Location request

(LOC) messages, Location history request (HIS) messages.

For more information on how the device responds these

messages, see

POSITIONING FEATURES ON PAGE 42

For more information on how to create location request

messages, please see the separate document on MPTP com-

mands, located at the Web site: www.benefon.com.

PART C: OPERATING THE SERAPH

The device may receive an AT command via the system con-

nector. The AT commands can be used for carrying out sim-

ilar things that are done via MPTP messages.

For example, AT commands are used when configuring set-

tings to the device locally, by using the Benewin software.

For more information on handling AT commands, please see

the separate document on AT commands, located at the Web

site

www.benefon.com.

INCOMING CALLS AND MESSAGES 37

Table of Contents