Installation Instructions; Phone Programming; Programming Subscriber Id In Dragon - Benefon DRAGON TDP70WN Service Manual

3.0 INSTALLATION INSTRUCTIONS

Installation Instructions

3.1 Phone Programming

You can program Benefon Dragon by using either the keys on your phone, or
the BeneLoc computer program and maintenance adapter. In either case, you
will need a localbox.
Programming Menu Commands:
- SALES DATE
- RADIO PATH ID
- OWN NUMBER
- PHONE CODE
- Y1 Y3 ID (additional operator indicator)
- SW VERSION
- SAK
- PRODUCT CODE
- UPDATE LOCALBOX
- INTERLEAVING
- AUTOMATIC ROAMING
- RESET RAM

3.1.1 Programming Subscriber ID in Dragon

3.1.1.1 How to program the ID in Dragon:
1. Turn on the Dragon normally with its own battery.
2. Hook up the rapid charger until it the phone indicates that it has started
charging.
3. Remove the battery and watch that the display shows an empty battery
frame.
4. Hook the localbox adapter up to the localbox via the Spica cable, and then
attach it to the phone where the battery would normally go.
5. Restart the Dragon.
6. You can get to the ***BENEFON*** menu with the arrow key. Select it, and
from there you will find "Radio Path ID", where you can program the ID of the
phone.
6DP_70GB.fm
Product: TDP70WN /
5.9.2000
Installation Instructions
1