Service Center Number; Authorization; Specifying Authorized Numbers; Authorization Off - Benefon SERAPH NT Operating Instructions Manual

PART B: CONFIGURING SETTINGS FOR THE SERAPH

Service center number

You can change and store the phone number, which is used
for sending telematics protocol messages to the service cen-
ter. Service center number can have control over the device
at all time and thus it is always authorized.
Key in the number of the service center (1).

Authorization

SPECIFYING AUTHORIZED NUMBERS

The device is allowed to respond to protocol messages from
the authorized numbers automatically at any time.
1. Always authorized numbers are:
- The numbers stored in the
- The number stored as the
2. Authorization can also be temporary, permission given
from time to time under special conditions, such as in
emergency mode. Temporarily authorized numbers can
be:
- The emergency numbers stored in the
calling list.

Authorization On

list and
Service center
number.
Reporting and

AUTHORIZATION OFF

If authorization is turned off (2), all requests are automati-
cally processed.
If the service center number is defined, any responses are al-
ways sent to that number.
If the service center number is NOT defined, responses are
sent to the number from which the request came.
AUTHORIZATION ON
If authorization is turned on (3), all requests coming from
authorized numbers are automatically processed. Any re-
sponses are sent to the number from which the request
came.
All requests coming from unauthorized numbers are dis-
carded.
SERAPH SETTINGS: TELEMATICS 25