Table of Contents
Advertisement
MAKING AN EMERGENCY CALL WHICH
INCLUDES BOTH CALL NUMBERS AND SMS
NUMBERS
<
1. Press
.
2. The device sends the message including position infor-
mation. If current position coordinates are not available,
previous coordinates will be sent instead.
3. If the
Resend unconfirmed reports
the device will go on sending the message until receiving
party sends confirmation to the device. For more infor-
mation, see
SETTING CONFIRMATION FOR EMERGENCY RE-
PORT DELIVERY ON PAGE 22
4. Microphone opens audio to emergency numbers or both
ways, depending on selected
mation, see
SELECTING CALL MODE ON PAGE 21
5. The device alerts until the call is answered.
6. A voice call in progress.
40 OUTGOING CALLS AND MESSAGES
PART C: OPERATING THE SERAPH
setting is turned on,
.
Call mode
. For more infor-
.
CANCELLING EMERGENCY CYCLE
As a sign of cancellation period, you may hear the cancella-
tion tone. You may also see a timer indicating time left for
cancellation.
•To cancel the entire emergency cycle, press the
briefly during the cancellation period.
•When the emergency cycle has already started, it cannot
be cancelled entirely, but the rest of the emergency calls
and messages can be cancelled. In order to do so, press
c
the
key and hold it down for five (5) seconds.
When the cancellation is succeeded, the device will return
to normal operation.
NOTE:
Cancellation time
must be configured in the device in
advance, otherwise the whole emergency cycle cannot be
cancelled at all. For more information, see
.
CELLATION TIME ON PAGE 20
c
key
SELECTING CAN-
Advertisement
Table of Contents
