3.
Select the file, and click Open.
4.
Click Apply to upload the list with access points to the Known AP List.
View and Save Access Point Lists
The wireless access point detects nearby APs and wireless stations and maintains them in a
list. You can use this list to prevent them from connecting to the wireless access point.
To view the Unknown AP List and save it to a file:
1.
Select Monitoring > Rogue AP > Unknown AP List. The Unknown AP List screen
displays:
Figure 46.
2.
Click Refresh to let the wireless access point discover the access points and populate the
Unknown AP List.
The following table explains the fields of the Unknown AP List screen:
Table 20. Unknown AP List Fields
Field
MAC Address
SSID
Privacy
Channel
Rate
Beacon Int.
# of Beacons
Last Beacon
74 |
Chapter 4. Management
ProSafe Wireless-N Access Point WNAP320 Reference Manual
Description
The MAC address of the unknown AP.
The SSID that the unknown AP is using.
Indicates whether or not security is enabled (1 means enabled; 0 means
disabled).
The channel that the unknown AP is using.
The transmit data rate in Mbps of the unknown the AP.
The interval for each beacon transmission in ms.
The number of beacons transmitted by the unknown AP that the wireless
access point has detected.
The timestamp that indicates the time when the most recent beacon was
detected.