NETGEAR ProSafe WNAP320 Reference Manual page 40

Figure 15.
3. Specify the settings of the Profile Definition section of the Edit Security Profile screen as
explained in the following table:
Table 8. Profile Definition Settings of the Edit Security Profile Screen
Field
Profile Name
Wireless Network Name
(SSID)
Broadcast Wireless
Network Name (SSID)
4. Specify the settings of the Authentication Settings section of the Edit Security Profile screen
as explained in the following table.
40 | Chapter 3. Wireless Configuration and Security
ProSafe Wireless-N Access Point WNAP320 Reference Manual
Description
Enter a unique name of the wireless security profile that makes it easy to
recognize the profile. The default names are NETGEAR, NETGEAR-1,
NETGEAR-2, and so on through NETGEAR-7. You can enter a value of up
to 32 alphanumeric characters.
The wireless network name (SSID) for the wireless security profile. The
default names are NETGEAR_11ng, NETGEAR_11ng-1,
NETGEAR_11ng-2, and so on through NETGEAR_11ng-7.
Select the Yes radio button to enable the wireless access point to
broadcasts its SSID, allowing wireless stations that have a null (blank)
SSID to adopt the wireless access point's SSID. Yes is the default setting.
To prevent the SSID from being broadcast, select the No radio button.