Mount The Wireless Access Point; Ceiling Installation - NETGEAR ProSafe WNAP320 Reference Manual

After you have completed the configuration of the wireless access point, you can reconfigure
the computer that you used for this process back to its original TCP/IP settings.

Mount the Wireless Access Point

This section includes the following subsections:
•

Ceiling Installation

• Wall Installation
• Desk Installation
Ceiling Installation
To install the wireless access point using the ceiling installation kit:
1. Verify the package content of the ceiling installation kit.
2. Detach the mounting plate from the wireless access point.
28 | Chapter 2. Installation and Basic Configuration
ProSafe Wireless-N Access Point WNAP320 Reference Manual
on this page
on page 30
on page 33
Mounting plate
Clamp with screws