NETGEAR ProSafe WNAP320 Reference Manual page 49

ProSafe Wireless-N Access Point WNAP320 Reference Manual
2. Specify the settings as explained in the following table:
Table 13. RADIUS Server Settings
Field
RADIUS Server Settings
Primary
Authentication Server
Secondary
Authentication Server
Primary
Accounting Server
Secondary
Accounting Server
Authentication Settings
Reauthentication
Time (Seconds)
Update Global Key
Every (Seconds)
3. Click Apply to save your settings.
Descriptions
IP Address Enter the IP address of the primary RADIUS server for
authentication.
Authentication Enter the UDP port number of the wireless access point that is used
Port to access the primary RADIUS server for authentication. The
default port number is 1812.
Secret Enter the shared key that is used between the wireless access point
and the primary RADIUS server during authentication.
IP Address Enter the IP address of the secondary RADIUS server for
authentication. The secondary RADIUS server is used when the
primary RADIUS server is not available.
Authentication Enter the UDP port number of the wireless access point that is used
Port to access the secondary RADIUS server for authentication. The
default port number is 1812.
Secret Enter the shared key that is used between the wireless access point
and the secondary RADIUS server during authentication.
IP Address Enter the IP address of the primary RADIUS server for accounting.
Authentication Enter the UDP port number of the wireless access point that is used
Port to access the primary RADIUS server for accounting. The default
port number is 1813.
Secret Enter the shared key that is used between the wireless access point
and the primary RADIUS server during the accounting process.
IP Address Enter the IP address of the secondary RADIUS server for
accounting. The secondary RADIUS server is used when the
primary RADIUS server is not available.
Authentication Enter the UDP port number of the wireless access point that is used
Port to access the secondary RADIUS server for accounting. The default
port number is 1813.
Secret Enter the shared key that is used between the wireless access point
and the secondary RADIUS server during the accounting process.
The interval in seconds after which the supplicant is reauthenticated with the
RADIUS server. The default interval is 3600 seconds (1 hour). Enter 0 to disable
reauthentication.
Select the check box to allow the global key update, and enter the interval in
seconds. The check box is selected by default, and the default interval is
1800 seconds (30 minutes). Clear the check box to prevent the global key update.
Chapter 3. Wireless Configuration and Security | 49