Factory Default Settings - NETGEAR ProSafe WNAP320 Reference Manual

ProSafe Wireless-N Access Point WNAP320 Reference Manual
Table 29. ProSafe Wireless-N Access Point WNAP320 Technical Specifications
Feature
Environmental
specifications
Electromagnetic
compliance

Factory Default Settings

You can use the Reset button located on the rear of the wireless access point to reset all
settings to their factory defaults. This is called a hard reset.
• To perform a hard reset, use a sharp object to push and hold the Reset button for
approximately 5 seconds (until the Test LED blinks rapidly). This returns the wireless
access point to the factory configuration settings that are shown in the following table.
Note: Pressing the Reset button for a shorter period of time simply causes
the wireless access point to reboot.
Table 30. ProSafe Wireless-N Access Point WNAP320 Default Configuration Settings
Feature
Login
User login URL
User name (case-sensitive)
Login password (case-sensitive)
Ethernet Connection
Static IP address
Ethernet MAC address
Port speed
Description
Operating temperature: 0 to 55° C (32 to 131° F)
Operating humidity: 10–9%, noncondensing
FCC Part 15 Class B and Class E, CE, and C-TICK
Description
192.168.0.100
admin
password
192.168.0.210
See bottom label.
10/100/1000
Appendix A. Supplemental Information | 107