Log In To The Access Point After Initial Setup To View Or Change Settings - NETGEAR WAC505 User Manual

Insight Managed Smart Cloud Wireless Access Point WAC505 User Manual
Log In to the Access Point After Initial Setup to View or
Change Settings
After you set up the access point, you can view or change the settings for the access point.
To log in to the access point's local browser interface:
1. Open a web browser from a computer that is connected to the same network as the access point or to
the access point directly through an Ethernet cable or WiFi connection.
2. Enter the IP address that is assigned to the access point.
A login window opens.
3. Enter the access point user name and password.
The default user name is admin. The password is the one that you specified the first time that you
logged in. The user name and password are case-sensitive.
The Dashboard page displays. The following figure shows part of the Dashboard page.
The Dashboard page displays various panes that let you see the status of your access point at a glance.
For more information about the Dashboard page and its various panes, see
and the Network
Install the Access Point in Your Network and Access It for Initial Configuration
on page 110.
28
Monitor the Access Point