Log In To The Access Point After Initial Setup To View Or Change Settings; Change The Admin User Account Password - NETGEAR WAC510 User Manual

Log In to the Access Point After Initial Setup to View or
Change Settings
After you set up the access point, you can view or change the settings for the access point.
To log in to the access point's web management interface:
1. Open a web browser from a computer that is connected to the same network as the access point or to
the access point directly through an Ethernet cable or WiFi connection.
2. Enter the IP address that is assigned to the access point.
A login window opens.
3. Enter the access point user name and password.
The default user name is admin. The default password is password. The user name and password
are case-sensitive.
The Dashboard page displays. The following figure shows part of the Dashboard page.
The Dashboard page displays various panes that let you see the status of your access point at a glance.
For more information about the Dashboard page and its various panes, see
and the Network

Change the Admin User Account Password

We recommend that you change the default password that you use to log in to the access point to a more
secure password. This is the password that you use to log in to the access point with the user name admin.
Install the Access Point in Your Network and Access It for Initial Configuration
AC WiFi Business Access Point WAC510
on page 99.
22
Monitor the Access Point