Figure 52.
e. Click Edit to configure the security profile settings. The Edit Security Profile screen
displays:
Figure 53.
f. Specify the settings as explained in the following table:
Table 25. Point-to-Point Bridge Profile and Authentication Settings
Field
Profile Definition
Profile Name
Remote MAC Address
86 |
Chapter 5. Advanced Configuration
ProSafe Wireless-N Access Point WNAP320 Reference Manual
Description
Enter a profile name that is easy to remember. The default name is
NETGEAR-WDS-1.
Enter the MAC address of the remote wireless access point (the MAC
address of AP2 on LAN Segment 1 in
Figure 51
on page 85).