Restore The Configuration - NETGEAR ProSafe WNAP320 Reference Manual

ProSafe Wireless-N Access Point WNAP320 Reference Manual
Figure 34.

Restore the Configuration

IMPORTANT:
During the restoration process, do not try to go online, turn off the
wireless access point, shut down the computer, or do anything else
to the wireless access point until it finishes restarting!
To restore your settings from a saved configuration file:
1. Select Maintenance > Upgrade > Restore Settings. The Restore Settings screen
displays:
Figure 35.
2. Click Browse and locate the saved configuration file (the file name is config).
3. Click Apply to initiate the restoration process. During the restoration process, the wireless
access point automatically restarts. The restoration process typically takes about 1 minute.
When the Test LED turns off, wait a few more seconds before doing anything with the
wireless access point.
Chapter 4. Management | 61