NETGEAR ProSafe WNAP320 Reference Manual page 51

ProSafe Wireless-N Access Point WNAP320 Reference Manual
4. Click Refresh to refresh the Available Wireless Stations table. The wireless access point
places the MAC addresses of the attached wireless stations in this table.
5. Populate the Trusted Wireless Stations table by one of the following methods:
• Select MAC addresses from the Available Wireless Stations table:
a. Select individual check boxes for MAC addresses, or select all MAC addresses by
selecting the check box in the heading.
b. Click Move to transfer the MAC addresses from the Available Wireless Stations
table to the Trusted Wireless Stations table.
• Enter MAC addresses manually:
a. Enter a MAC address directly in the Trusted Wireless Stations table.
b. Click Add.
To delete a MAC address from the Trusted Wireless Stations table, select individual check
boxes for MAC addresses, or select all MAC addresses by selecting the check box in the
heading, and then click Delete.
6. Click Apply to save your settings.
Now, only devices in the Trusted Wireless Stations table are allowed to wirelessly connect
to the wireless access point.
WARNING!
When configuring the wireless access point from a wireless
computer whose MAC address is not in the access control list,
you will lose your wireless connection when you click Apply. You
must then access the wireless access point from a wired
computer or from a wireless computer which is on the access
control list to make any further changes.
Chapter 3. Wireless Configuration and Security | 51