Configure Radius Server Settings - NETGEAR ProSafe WNAP320 Reference Manual

Table 12. WPA-PSK, WPA2-PSK, and WPA-PSK & WPA2-PSK Settings (Continued)
Field Descriptions
Passphrase Enter a passphrase. The passphrase length must be between 8 and 63 characters
(inclusive). The default passphrase is sharedsecret.
You can display the actual passphrase by selecting the Show Passphrase in Clear Text
radio button.
Show Passphrase Select the Yes radio button to display the actual passphrase in the Passphrase field. The
in Clear Text default setting is No.

Configure RADIUS Server Settings

For authentication, accounting, or both authentication and accounting using RADIUS, you
must configure primary servers and optional secondary servers. These RADIUS server
settings can apply to all devices that are connected to the wireless access point.
To configure the RADIUS server settings:
1. Select Configuration > Security > Advanced > Radius Server Settings. The Radius
Server Settings screen displays. (The following figure shows some examples.)
Figure 25.
48 | Chapter 3. Wireless Configuration and Security
ProSafe Wireless-N Access Point WNAP320 Reference Manual