Activating/Quitting The Tp Menu; Switching Tp On/Off; Selecting Automatic Tracking - Becker Traffic Pro 4720 Operating Manual

Activating/quitting the TP menu

Activating: Press the button (traffic announcements can-
not be transmitted).
Press the multifunction button.
Quitting: Press the button or the TP menu will be auto-
matically terminated after 8 seconds without actuation.

Switching TP on/off

In all modes and wavebands, TP can be switched on/off by
pressing the button for more than 2 seconds.
TP can also be switched on/off in the TP - menu.
Switching on: To switch on TP in the TP menu, press
the multifunction button repeatedly until
played.
Switching off: To switch off TP in the TP menu, press the
multifunction button repeatedly until
played.
Subject to errors and technical modifications
TP is switched off after returning to normal display.

Selecting automatic tracking

Only applies when TMC is switched off.
In all modes and wavebands, automatic tracking can be
switched on by pressing the
2 seconds.
To switch on automatic tracking in the TP menu, press the
multifunction button repeatedly until
played.
is dis-
Attention: If a TP transmitter has already been pro-
grammed directly, it will once again be select-
ed as the TP transmitter.
is dis-
35
Navigation CD 8.X
button for more than
is dis-
Copyright by Becker GmbH, D-76303 Karlsbad