Table of Contents
Advertisement
Selecting automatic tracking
In all modes and wavebands, automatic
tracking can be turned on by pressing
and holding the
button for more than
2 seconds.
In the TP menu:
X
Press multifunction button
peatedly until TP on appears.
Attention:
If a TP station has already been pro-
grammed directly, it will once again be
selected as the TP station.
Selecting / cancelling direct
programming
Switching on TP menu.
X
Selecting:
X
Press the
multifunction button.
X
Using the right rotary control
re-
lect the desired TP station and press to
confirm.
After a short delay and without actua-
tion, the selected station is accepted.
Cancelling:
X
Press the
multifunction button.
X
Select Autoselect with the right rotary
control
and press the control to
confirm.
After a short delay and without actua-
tion, direct programming is cancelled.
Switching mute on/off
X
After selection of a TP or EON sta-
tion, the mute function can be activat-
ed by pressing the
Thereafter, only traffic announcements
and navigation announcements will be
switched through.
, se-
X
The mute function is cancelled by
pressing the
button again.
Interrupting TP announce-
ments
An
announcement
broadcast can be interrupted.
X
Briefly press the
TP announcement.
The unit switches back to the previously
selected mode.
Radio mode
button briefly.
currently
being
button during the
161
Hide quick links:
Advertisement
Table of Contents
