Midi Filter - Korg X5DR AI2 SYNTHESIS MODULE Owner's Manual

* D MIDI Filter
This page determines whether or not each Track will receive the MIDI Program Change and
whether or not Damper message, After Touch message, and Control effect are applied.
00D Pf Df Af Cfø
T01 EN EN DI EN
* D
LCD Parameter
Program Change
Filter (Pf)
Damper Pedal Filter
(Df)
* D
After Touch Filter (Af)
Control Change Filter
(Cf)
Program Change Filter: Determines whether or not each Track receives the MIDI Program
Change messages.
EN: Tracks with the EN (Enable) setting receive the Program Change messages and switch the
Programs. Set the overall X5DR Program Change Filter on 2C MIDI FILTER PRG in Global
mode. (see "2C Program Change Filter" on page 152.)
Note: If the Global mode MIDI Program Change Filter 1 is set to "DIS", the Program Change
messages are completely disabled. Furthermore, if you set it to ENA or PRG, Bank Select and
Program Change messages will select Bank and Program. If you set it to "NUM", only the
Program is changed. (see "2C Program Change Filter on page 152)
Damper Pedal Filter: Determines whether or not each Track receives the Damper Pedal On/Off
messages.
EN: The Damper Pedal messages are received on the Track for which "EN (Enable)" is selected.
DI: The Damper Pedal messages are not received on the Tracks for which "DI (Disable)" is
selected.
After Touch Filter: Determines whether or not each Track receives the After Touch messages.
EN: After Touch messages are received on the Track for which "EN (Enable)" is selected.
DI: After Touch messages are not applied to the Tracks for which "DI (Disable)" is selected.
Control Change Filter: Determines whether or not the controllers (e.g., pitch bend, pitch
modulation, or the Volume) are received on each Track.
EN: The Controller messages are received on the Track for which "EN (Enable)" is selected.
DI: The Controller messages are ignored on the Tracks for which "DI (Disable)" is selected.
• These parameters for all the tracks are set to "EN", when you turn the power on to the X5DR,
when 23A SET TO GM is executed, or the X5DR receives the GM on message.
Range
DI: Disable Program Change message is ignored.
EN: Enable Program Change message is received.
DI: Disable Damper Pedal message is ignored.
EN: Enable Damper Pedal is received.
DI: Disable After Touch message is ignored.
EN: Enable After Touch is received.
DI: Disable MIDI Controllers are ignored.
EN: Enable MIDI Controllers are received.
Reference Guide
Description
3
Multi Setup
Parameters
111