Korg X5DR AI2 SYNTHESIS MODULE Owner's Manual page 150

Combination Effects: Serial
Effects 38 and 39 use mono input–stereo output chorus/flangers in series with stereo delays.
38: Chorus–Delay
This effect consists of a chorus and delay in
series. The input signals are summed, then
fed to two chorus units. The modulation
signals fed to each chorus are 90 degrees out
of phase with each other. Feedback
parameters are available for both chorus and
delay.
39: Flanger–Delay
This effect consists of a flanger and delay in
series. The input signals are summed, then
fed to two flanger units. The modulation
signals fed to each flanger are 90 degrees out
of phase with each other. Feedback
parameters are available for both flanger and
delay.
17A Chor-Dly ø
Cho.DT11ms FB+10
17A
Chorus, Flanger
LCD Parameter
Delay Time (Cho.DT)
17A
Feedback (FB)
Mod Depth (Cho.Mod) 0–99
17B
Mod Speed (M.SP)
Delay
LCD Parameter
Delay Time (Dly.DT)
17C
Delay Feedback (FB)
For effects 38 and 39, dynamic modulation (16C) can be used to control the DRY:EFF balance.
17B Chor-Dly ø 17C Chor-Dly
Cho.Mod50 M.SP30 Dly.DT110
17B
Range
0–50 ms
–99...+99%
1–99
Range
0–450 ms
–99...+99%
Left
Feedback
Chorus
Mod
Chorus
Feedback
Right
Left
Feedback
Flanger
Mod
Flanger
Feedback
Right
ø
FB-10
17C
Description
Chorus/Flanger delay time
The amount of effected signal that is fed back into the effect.
Minus values invert the feedback signal phase
Modulation depth
Modulation speed
Description
Delay time (set in 2 ms steps)
The amount of delay signal that is fed back into the effect.
Minus values invert the feedback signal phase
Reference Guide
Mix
Feedback
Delay
4
Delay
Feedback
Mix
Effect
Parameters
Mix
Feedback
Delay
Delay
Feedback
Mix
137