Korg X5DR AI2 SYNTHESIS MODULE Owner's Manual page 133

Reference Guide
Effects Types & Parameters
Different parameters are available for different effects. Effect 0 (No Effect) through Effect 47
(Delay/Rotary Speaker) can be selected for Effect1 and Effect2. Effect1 LCD screens are
numbered 16A through 16D. Effect2 LCD screens are numbered 18A through 19D. Effect1 LCD
screen numbers are used in this Reference Guide.
No Effect
0: No Effect
When NO EFFECT is selected, the effect processors are bypassed.
Effects can be turned off using "16A–16C Effect1 Setup" and "18A–18C Effect2 Setup".
However, for some effects, the high and low EQ are still active. Selecting 0:No Effect allows you
to bypass these effects completely.
Reverb
These effects simulate reverberant acoustics, adding ambience to the sound.
Left
Right
1: Hall
This effect simulates the reverb characteristics and natural ambience of a medium size hall.
2: Ensemble Hall
This effect simulates the reverb characteristics and natural ambience of an ensemble hall. Ideal for
string and brass ensembles.
3: Concert Hall
This effect simulates the reverb characteristics and natural ambience of a large hall with
pronounced early reflections.
4: Room
This effect simulates the reverb characteristics and natural ambience of a small room.
5: Large Room
This effect simulates the reverb characteristics and natural ambience of a large room with
pronounced reverb density. Reverb time settings of about 0.5 seconds produce an effect similar to
gated reverb.
120
Dry Signal
EQ Pre Delay
Dry Signal
Mix
Reverb
Mix
Dry
E.R Level
Rev Time
Pre Delay