Korg X5DR AI2 SYNTHESIS MODULE Owner's Manual page 132

With the Parallel 3 placement, buses A and B are sent straight to the outputs. Bus C signal is sent
to Effect1 and bus D signal is sent to Effect2. The effect outputs, each with independent level
control, are then mixed down to the L/MONO and R outputs. This placement works well when
playing GM compatible songs.
Note: For Serial, Parallel 1, and Parallel 2 placements, if Pan 3 or Pan 4 is set to off, signals
sent to bus C and bus D are not output.
21A Copy Effects
This function allows you to copy the effect parameter settings from a Program, Combination, or
song to the currently selected Program, Combination, or Multi setup.
21A COPY EFF
PROG A00 OK?
21A
LCD Parameter
Effect Copy Source
21A
Source Number
OK to copy
To copy effect parameters, select the effect copy source and the source number using the [ ] and
[®] keys, position the cursor on OK?, then press the [ ] button. The message "Are You Sure OK?"
appears. Press the [ ] button to continue, or the [ ] button to cancel. The effect parameters are
copied to the currently selected Program, Combination, or Multi. Pan, Send C, and Send D
settings, which are set for oscillators, Timbres, and tracks, are not copied.
Range
PROG
COMBI Select the effect copy source
MULTI
A00–A99
Programs
G01–136
Select the source number
Combinations 00–99
OK? Executes effect copy
Reference Guide
Description
119
4
Effect
Parameters